PCI IDE Cards

• 2 Port IDE PCI Card

• Specifications:
• • 2 Independent IDE/ATA Channels
• • Supports up to four IDE/ATA Devices
• • Supports Ultra and Multiword DMA timing modes
• • CRC (Cyclical Redundancy check)
• • 128 Bytes buffer
• • Built in 80 pin cable detect circuitry
• • Supports Bus Master DMA at 133 MB/sec PCI burst rate
• • Supports maximum IDE/ATA data transfer rate of 66MB/sec(100MB/sec)
• • 3.3v operating Voltage with 5v tolerant I/O

Requirements:

• •IBM Compatible Pentium PC with 64mb RAM
• • Windows 98SE/ ME/ NT 4.0/ 2000/ Server 2003/ XP or Linux
• • Available PCI Slot

• 2 Port RAID PCI IDE Card

• Specifications:
• • 2 Independent IDE/ATA Channels
• • Compliant with PCI Specification Revision 2.2
• • Compliant with PCI IDE Controller Specification Revision 1.0
• • Support RAID sets (striped, mirrored & mirrored striped) or single drive configuration
• • Supports up to four IDE/ATA Devices
• • Supports mixed manufacturers and capacities in the same RAID set
• • Supports large capacity Hard Drives in excess of 137GB
• • Supports Ultra and Multiword DMA timing modes
• • CRC (Cyclical Redundancy Check)
• • 128 Bytes Buffer
• • Built in 80 Pin cable detect circuitry
• • Supports Bus Master DMA at 133 MB/sec PCI burst rate
• • 3.3V Operating Voltage with 5V tolerant I/O
• Requirements:

• •IBM Compatible Pentium PC with 64mb RAM
• • Windows 98SE/ ME/ NT 4.0/ 2000/ Server 2003/ XP or Linux
• • Available PCI Slot