Ethernet adaptor

Our USB 2.0 to Ethernet adapter is the perfect solution to adding an Ethernet port to your computer or devices without adding an internal card.

• Features:
• • Compliant with the USB 2.0 and USB 1.1 Specifications
• • Compatible with IEEE 802.3u 100 BASE-T, TX and T4
• • Single chip USB to 10/100 Mbps Fast Ethernet Controller
• • Supports Bus Power, No additional Power Supply is required
• • Supports Full-Duplex and Half-Duplex operations
• • Provides a MII port for both Ethernet and PHY Interface
• • Supports suspended mode and remote wake-up (Wake on LAN)
• • PHY power down mode for power saving
• • Supports Plug and Play Operation
• • Connector: USB A type interface, UTP RJ45 interface
• • Power and Link Status Indication
• System Requirements:
• • IBM Compatible Pentium 233 Mhz or faster
• • 64 Mb Ram or more
• • Available USB Port
• • One of the following Operating Systems: Windows 2000 Windows XP, Windows Vista
• • Nintendo Wii

•  

  Price: £ 7.69 EX VAT

NEWLink USB 2.0 Cardbus

To further expand our range of USB 2.0 compatible items, we now stock a 2 and 4 Port USB 2.0 CardBus, which supports a High Speed transmission rate of up to 480 Mbps. The card is fully backward compatible with USB revision 1.1 devices, and allows the connection of multiple USB 2.0 and / or USB 1.1 peripherals. Installation is quick and easy; simply slide the PC card into the Type II CardBus slot on your notebook, set-up the drivers and you are USB 2.0 ready!

• Features:
• • Data Transfer rate of up to 480 Mbps
• • Supports OHCI and EHCI USB Interface
• • Compliant with USB 2.0 and 1.1 Specification
• • Automatically Switches to the Peripheral’s Highest Supported Speed
• • Provides 4 external USB Type A ports
• • Fully backward compatible with USB 1.1 Specification
• • Connect up to 127 USB Devices
• • Additional Power Supply included.
• System Requirements:
• • iMac or Laptop PC with a Pentium 266 MHz or faster CPU.
• • 32 MB Ram or More.
• • 32 Bit CardBus / PCMCIA Type II slot.
• • Compatible with:-
  MS Windows 98SE / ME / 2000 / XP (USB 1.1 & 2.0) MAC OS 10.1 or above (USB 2.0) MAC OS 8.6 or above (USB 1.1)

•  

  Price: £ 4.06 EX VAT

NEWLink USB 2.0 Host Cards

NEWLink 2 and 4 Port High-Speed USB 2.0 PCI Cards.

• Features:
• • VIA Chipset for PC use only
• • Compliant with Universal Serial Bus Revision 2.0
• • Supports Data Transfer Rates of 1.5/12/480 Mbps
• • Compliant with Open Host Controller Interface Specification for USB Revision 1.1
• • Compliant with Enhanced Host Controller Interface Specification USB 2.0 Revision 0.95
• • PCI multi-function device consists of two OCHI controller cores for full-low speed signalling and one EHCI controller core for High-Speed signalling
• • Root Hub with 2 or 4 downstream facing ports. (Type A Socket)
• • 32-Bit 33 Mhz host interface compliant to PCI Specification release 2.2
• • Root Hub with 2 or 4 downstream facing ports. (Type A Socket)
• • Supports PCI-Bus Power Management interface specification release 1.
•  
• System Requirements:
• • iWindows98SE/ME/2000/XP
• • 64 Mb Ram or Above
• • Pentium 233 MMX or Higher

•  

  2 Port Price: £ 4.06 EX VAT

• 4 Port Price: £ 6.28 EX VAT

NEWLink USB 2.0 Hub

EXTERNAL USB 2.0 4 PORT HI-SPEED COMPACT HUB.

• Features:
• • Compact design
• • Compliant with USB specification Revision 2.0
• • Supports High-Speed (480 Mbps), Full-Speed (12
  Mbps) and Low-Speed (1.5 Mbps)
• • Over current protection on each port.
• • Power LED to indicate Self-power or Bus Power
• • Chains up to 127 USB devices
• • Supports Plug and Play
• • USB and ACPI compliant
• System Requirements:
• • System running USB 2.0
• • 1 Free USB 2.0 Port
• Package Contents:
• • 4 Port USB 2.0 Hub
• • 1x 1.5 Mtr USB 2.0 Cable
• • Power Supply

•  

  Price: £ 6.28 EX VAT

NEWLink USB 2.0 Hub

Newlink 4 Port Black USB 2.0 Hub

• Features:
• • 4 USB 2.0 Ports up to 100mA per port, or up to 500mA (with power adapter)
• • Supports over current protection on each port.
• • Provides 4 Type A Female and 1 Type B Fe- male Connectors
• • Supports High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps)
• • Compliant with USB specification Revision 2.0
• • Chains up to 127 USB devices
• • Power LED to indicate Self-power or Bus Power
• • Supports Plug and Play
• System Requirements:
• • System running USB 2.0
• • 1 Free USB 2.0 Port
• • Windows 2000, XP, Vista or Mac OS 8.6 / 9.x / 10.
• Package Contents:
• • 1x 4 Port USB 2.0 Hub
• • 1xUSBA-BDataCable
• • 1x UK Power Supply

•  

  Price: £ 6.29 EX VAT

NEWLink USB 2.0 PCI Card and Hub

Introducing our range of Internal USB 2.0 Hubs, which is configured to support the maximum speed of 480 Mbps, while also supporting the 1.5 and 12 Mbps speeds of USB 1.1.

• USB2 - 331RK Features:
• •Compliant with Universal Serial Bus Specification Revision 2.0
• • SHigh-speed or Full-Speed packet protocol sequencer for Endpoint 0/1
• • 4 downstream ports capable of handling High-Speed (480 Mbps), Full-Speed (12Mbps), and Low-Speed (1.5 Mbps)
• • Supports over-current detection and individual power control
• • Supports self-power mode only
• NLUSB2 - 335RK Features:
• • Compliant with USB specification 2.0 & 1.1
• • Supports Hi-Speed (480 Mbps), Full Speed (12 Mbps) and Low Speed ( 1.5 Mbps) data transfer rate
• • Compliant with EHCI ( USB 2.0 ) and OHCI ( USB 1.1 ) Host controllers
• • Supports Legacy Keyboard and Mouse emulation in DOS environment
• • High performance PCI Bus Master
• • Compliant with PCI specification 2.2
• • Supports up to 33 MHz PCI interface clock
• • Supports PCI power management specifications 1.1
• • Compatible with Plug & Play and Hot Swap functions
• • Supports up to 127 USB devices
• • Support Windows 98/ME/2000/XP
  MAC 8.6 ( USB 1.1) or OSX ( USB 2.0 )
• Package Contents:
• • 2 Port USB 2.0 PCI Card
• • 4 Port USB 2.0 3.5” Drive Bay Hub
• • Connection Cable
• • Driver CD

•  

  Price: Sold Out