cabling solutions for all your needs
The Newlink IEEE 802.11g Wireless ADSL / 2 / 2+ Router connects to a ISP and provides Wired and/or Wireless Network / Internet connection. In wireless connection it is backwards compatible with IEEE 802.11b devices, and can transfer data at up to speeds of 54 Mbps, with a indoor distance of up to 50 Mtrs depending on surrounding environment. It provides WEP encryption/decryption at 64/128 bit, with a Built-in Firewall, MAC Address Filtering, and other features listed below.
FEATURES
• Compliant to ANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-G.992.3, ITU 992.4, ITU G.992.5 and READSL2 standards.
• Support all Digital Loop ITU G.992.3 annex I and J specifications. • Fully compliant with Annex A/B/B (U-R2) ADSL specifications. • Downstream and Upstream data rates up to 24Mbps and 1Mbps. • IEEE 802.11 b/g WLAN supports up to 54Mbps transmission rate. • Support 11g+ WLAN features with transmission rate up to 108Mbps (Optional). • Support WEP, WPA and 802.1X encryption for data security.
• Support RFC 1483 Bridge/Routing over ATM over ADSL. • Support PPPoE, PPPoA and IPoA Routing ATM over ADSL. • ATM Layer with Traffic Shaping QoS support ( UBR, CBR, VBR-rt, VBR-nt ). • IP Routing - RIPv1 and RIPv2. • DHCP Server, Relay and Client. • Supports DNS Relay / Server. • Supports DMZ functionality. • Supports VPN Pass-Through. • Support UPnP functionality. • Web-based setup for installation and management. • Built-in 4 Port 10/100 Mbps Fast Ethernet Switch for LAN connection. • Automatic MDI / MDI-X Crossover for 100 BASE-TX and 10 BASE-T ports. • Supports Auto Negotiation and Auto Speed Sensing. • Support full-duplex 802.3 flow control. • Support VLAN functionality. • Built in Firewall. • Support IP Filtering, MAC Filtering and Web Filtering. • Protection against IP and MAC Address Spoofing. • Flash memory for firmware upgrade. • Hardware Reset button for fast default setting recovery. • HTTP Web-Based Management/ Configuration. • LEDs indicator indicates connection status.
SYSTEM REQUIREMENTS
• Personal computer ( PC/Notebook ). • Pentium II compatible processor and above. • Ethernet LAN card or IEEE 802.11b or 802.11g • RJ45 Ethernet Port (Needed for Setup) • Wireless adaptor installed with TCP/IP protocol. • 64 MB RAM or more. • 50 MB of free disk space ( Minimum ). • Internet Browser. • CD-ROM Drive